HGS Tile Protective Coat Satin 1L

Preserve your tile flooring's integrity with HGS Tile Protective Coat Satin 1L. This innovative coating not only provides a smooth satin finish but also effectively repels dirt, stains, and wear for long-lasting protection.

Key Features:

• Ultra-thin coating that offers exceptional protection
• Protects against penetration of dirt, stains and wear
• For all types of floor tiles, flagstones and slate
• Adds a satin finish
• Simple to apply

How To Use: 

For optimal results follow the steps below. Use 1 litre for an estimated coverage of 40 m2 per layer.

1. Ensure that the surface is free from any grease or dust.
2. The glue/paste and grout of a new floor must be completely cured and dry. This usually takes 4-6 weeks of drying.
3. Do not shake before use and preferably apply with a wax spreader (see bottle label on the front). It is also possible to use a lint-free, clean towel wrapped around a squeegee. On rough surfaces use a (long-pile) paint roller.
4. Pour the tile finish liquid onto the floor and apply evenly in straight lanes and in one direction. Do not use circular motions or pressure.
5. Once the product has dried (after about 40 minutes), a second layer can be applied in the opposite direction onto the first layer.